欢迎访问ic37.com |
会员登录 免费注册
发布采购

86115D-104 参数 Datasheet PDF下载

86115D-104图片预览
型号: 86115D-104
PDF下载: 下载PDF文件 查看货源
内容描述: [Wide-Bandwidth Oscilloscope Mainframe and Modules]
分类和应用:
文件页数/大小: 37 页 / 3203 K
品牌: KEYSIGHT [ Keysight Technologies ]
 浏览型号86115D-104的Datasheet PDF文件第4页浏览型号86115D-104的Datasheet PDF文件第5页浏览型号86115D-104的Datasheet PDF文件第6页浏览型号86115D-104的Datasheet PDF文件第7页浏览型号86115D-104的Datasheet PDF文件第9页浏览型号86115D-104的Datasheet PDF文件第10页浏览型号86115D-104的Datasheet PDF文件第11页浏览型号86115D-104的Datasheet PDF文件第12页  
08 | Keysight | Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet  
Specifications (Continued)  
Precision time base operation and integrated precision timebase  
Measurement performance can be further enhanced by adding precision time base  
capability to the 86100 mainframe. The precision time base reduces the intrinsic jitter  
of the scope and is recommended when analyzing high-speed data signals. Precision  
timebase capability is achieved using the 86107A precision timebase plug-in module or  
integrating the precision timebase system within the 86100D mainframe (86100D Option  
PTB). 86100D-PTB does not consume a mainframe plug-in slot. 6  
Precision time base 86100D option PTB or 86107A  
86107A Option 010  
2.0 to 15.0 GHz  
86107A Option 020  
2.4 to 25.0 GHz  
86107A Option 040  
2.4 to 48.0 GHz  
86100D-PTB  
2.4 to 44 GHz  
Trigger bandwidth  
Typical jitter (RMS) using 86100D  
mainframe 4  
2.4 GHz: < 150 fs  
10 GHz: < 100 fs  
2.4 GHz: < 150 fs  
10, 20 GHz: < 100 fs  
2.4 GHz: < 150 fs  
10, 20, 40 GHz: < 100 fs 4 to 9 GHz < 120 fs  
9 to 44 GHz < 90 fs  
2.4 to 4 GHz < 200 fs  
Typical jitter (RMS) using 86100D  
mainframe 5  
2.4 GHz: < 280 fs  
10 GHz: < 200 fs  
2.4 GHz: < 280 fs  
10, 20 GHz: < 200 fs  
2.4 GHz: < 280 fs  
10, 20, 40 GHz: < 200 fs 5 to 10 GHz < 300 fs  
10 to 44 GHz < 200 fs  
2.4 to 5 GHz < 400 fs  
Time base linearity error  
Input signal type  
Input signal level  
< 200 fs  
Synchronous clock 1  
0.5 to 1.0 Vpp  
0.2 to 1.5 Vpp (typical functional performance)  
DC offset range  
± 200 mV 2  
≥ 200: 1  
50 Ω  
Required trigger signal-to-noise ratio  
Trigger impedance (nominal)  
Connector type 3  
3.5 mm (male)  
3.5 mm (male)  
2.4 mm (male)  
2.92 mm 4  
1. Filtering provided for Option 010 bands 2.4 to 4.0 GHz and 9.0 to 12.6 GHz, for Option 020 9.0 to 12.6 GHz and 18 to 25.0 GHz, for Option 40 9.0 to  
12.6 GHz, 18.0 to 25.0 GHz, and 39.0 to 48.0 GHz. Within the filtered bands, a synchronous clock signal should be provided (Clock, sinusoid, BERT trigger,  
etc.). Outside these bands, filtering is required to minimize harmonics and sub harmonics and provide a sinusoid to the 86107 input. (Not required for  
86100D-PTB).  
2. For the 86107A with Option 020, the Keysight 11742A (DC block) is recommended if the DC offset magnitude is greater than 200 mV.  
3. Ships with female-female connector saver(s).  
4. With 86107A module, or 86100D-PTB, and an 861xx, N1045 Option LOJ, or N1055A module (electrical channel).  
5. With 86107A module, or 86100D-PTB, and 54xxx, 8348x, and N1045A plug-in modules.  
6. If an 86107A module is used in an 86100D frame with Option PTB, the internal precision timebase is disabled.  
 复制成功!