TANTALUM HERMETICALLY SEALED / AXIAL — MIL-C-39003 KEMET®
KEMET APPROVED FAILURE RATE LEVELS — MIL-C-39003/H (GRADED)
KEMET APPROVED FAILURE
SERIES RATE LEVEL*
KEMET APPROVED FAILURE
STYLE
DESCRIPTION
STYLE
DESCRIPTION
SERIES
RATE LEVEL*
CSR09 Polar-Subminiature
T222 D (0.001%/k hrs.)
CSR33* Polar-Extended Range
Low Leakage
T252
D (0.001%/k hrs.)
CSR13* Polar-Standard MIL Case T212 D (0.001%/k hrs.)
CSS13** Polar-Standard MIL Case T216 C (0.01%/k hrs.)
CSR21 Polar-Standard Low ESR
MIL Case
CSR23* Polar-Extended Range
CSS33** Polar-Extended Range
Low Leakage
CSR91* Non-Polar
T256
T213
C (0.01%/k hrs.)
D (0.001%/k hrs.)
T262 D (0.001%/k hrs.)
T242 D (0.001%/k hrs.)
*Not approved to ‘D’ Failure Rate Level on all voltages and
capacitance values.
**MIL-C-39003/10 for space applications.
*Not approved to ‘D’ Failure Rate Level on all voltages and
capacitance values.
**MIL-C-39003/10 for space applications.
PERFORMANCE CHARACTERISTICS
• CAPACITANCE/VOLTAGE RANGE:
.0023-1200µF, 6-125 Volts.
• AC RIPPLE VOLTAGE: Permissible AC ripple volt-
age is related to the ESR of the capacitor and the
power dissipation capabilities of a particular case
size. Thermal capacities for the various case sizes
have been determined empirically and are listed
below. For additional description see page 78.
• CAPACITANCE TOLERANCE: Available in stan-
dard EIA values with ±20%, ±10% and ±5% toler-
ances.
Standard
Case Size
• DISSIPATION FACTOR: Maximum DF limits are
shown in corresponding series part number list-
ings on pages 7-41. See Application Notes
Section, page 76 for additional description.
Watts
.09
.100
.125
.180
T222
A
B
C
D
.070
.090
—
—
• DC LEAKAGE CURRENT: Each corresponding
part number table lists maximum leakage current
for each capacitor on pages 7-41. See Application
Notes Section, page 76 for additional description.
Maximum Power Dissipation: 25°C Ambient
• ENVIRONMENTAL CONSIDERATIONS:
A. Shock Test: MIL-STD-202, Method 213
B. Thermal Shock, MIL-STD-202,
Method 107, Condition B.
C. Moisture Resistance: MIL-STD-202,
Method 106.
• RATED VOLTAGE; WORKING VOLTAGE;
SURGE VOLTAGE; REVERSE VOLTAGE: See
Application Notes Section, Pages 76 & 77 for
description.
D. Solderability: MIL-STD-202, Method 208
• IMPEDANCE and ESR: See Application Notes
Section, pages 77 & 78 for description. Reference
ESR values are shown for commercial hermetical-
ly sealed capacitors on page 19.
For additional Environmental Test Information see
pages 80, 81 and 82.
• LEAD MATERIAL: Standard leads are solder-coat-
ed nickel per MIL-STD-1276.
• INSULATING SLEEVES: The standard insulating
material used in transparent high temperature
plastic, having 2000 volt dielectric strength, excel-
lent dimensional stability and chemical and cold
flow resistance.
• LEAD TAPE and REEL: Reeling per specification
RS-296. See pages 71 and 73 for additional infor-
mation.
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (803) 963-6300
5
KEMET [ KEMET CORPORATION ]
