Metallized Polypropylene Film EMI Suppression Capacitors
R47 Series, Class X1, 440 VAC, 110ºC (Automotive Grade)
Performance Characteristics cont'd
DissipationꢀFactorꢀ(tanδ)
≤ꢀ0.1%ꢀ(0.06%*)ꢀatꢀ1kHz,ꢀ+25°Cꢀ±5°Cꢀ(*ꢀtypicalꢀvalue)
The 100% screening factory test is carried out at 2,700 VDC/1,700 VAC. The voltage level is selected to meet the
requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not
permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures.
Test Voltage Between Terminals
Measuredꢀatꢀ+25°Cꢀ±5°C,ꢀaccordingꢀtoꢀIECꢀ60384–2
Minimum Values Between Terminals
Insulation Resistance
In DC Applications
Voltage Charge
100 VDC
Voltage Charge Time
1 min
Cꢀ≤ꢀ0.33ꢀμF
≥ꢀ1ꢀ•ꢀ105ꢀMΩ
Cꢀ>ꢀ0.33ꢀμF
≥ꢀ30,000ꢀMΩꢀ•ꢀµF
Recommendedꢀvoltageꢀ≤ꢀ1,000ꢀVDC
Qualification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test
methodsꢀandꢀconditionsꢀareꢀreferencedꢀinꢀdocumentꢀAEC–Q200,ꢀStressꢀTestꢀQualificationꢀforꢀPassiveꢀComponents.ꢀForꢀadditionalꢀ
information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com.
Impedance Graph
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3097_R47_X1_440 • 6/9/2016
5
KEMET [ KEMET CORPORATION ]
