ZIF Connectors
DL/DLM
DL/DLM Product Features
ɀ High pin count:
60, 96, 156, 260, 360, 624, 1248* or 2496*
contact positions.
Zero Insertion Force Camming Instructions
ɀ Variety of contacts:
– Crimp
– Square Post
– Wrap Post
– Buss
– PC/RC
ɀ Metal or plastic housing.
ɀ Wide range of accessories.
ɀ Easy actuation by screwdriver, socket wrench
(DL1/2/3 only), allen wrench or actuating
handle (see accessories page 47).
The long life and rapid mating are achieved through
the use of our Zero Insertion Force design.
Contacts in the plug and receptacle do not touch
each other while the connector halves are being
engaged.
It’s as easy as 1, 2, 3...
This is our ‘‘DL/DLM’’ series of connectors.
Step 1. The plug is placed over the receptacle.
Step 2. A ‘‘quarter turn’’ of an actuating shaft
mates all the contacts at once.
Step 3. The ‘‘same quarter’’ turn also physically
locks the connector halves together.
Connector engagement force is zero, and the only
wear on the contacts occurs as they are pressed
together and lightly wiped past each other during
the camming and locking operation.
*Contact Cannon for details.
Step 1. Simply place it together.
Step 2. Turn the cam a quarter turn.
Step 3. It’s locked and mated.
Contacts aligned.
Contacts engaged.
Contacts are mated.
Dimensions are shown in mm (inch)
Dimensions subject to change
8
ITT [ ITT Cannon ]
