ZIF Connectors
Contacts
Crimp Contacts — Loose
Loose
Plug (Bump)
Receptacle (Flat)
50µ inch gold contacts:
ɀ Recommended for all applications.
ɀ Offer the broadest amperage range.
ɀ Mandatory for low current applications (less
than 100 milliamps).
Material:
Finish:
Copper Alloy
Gold over nickel
Extraction Tool: 274-7029-007
Insertion Tool: None Required
Plug
50µInch Gold
Bumpɀ
Receptacle
50µInch Gold
Flatɀ
Plug and
Hand
Tool
(Page 55)
Wire
Accommodation
Receptacle
20µInch Gold
36 thru 38 AWG
28 thru 32 AWG
24 thru 26 AWG
20 thru 22 AWG
18 thru 20 AWGɍ
—
—
127000-2207+*
030-2416-001 ᔢ
030-2410-001 ᔢ
030-2409-001 ᔢ
030-2415-001 ᔢ
។
1
2
2
3
030-2416-003
030-2410-003
030-2409-003
030-2415-003
030-2494-001
030-2492-001
030-2491-001
030-2493-001
Note: For more information on tools and assembly, see pages 54-59.
ɍ Non Insulation Support
+
Sold in lots of 100 pieces.
For low current applications (less than 100 milliamps) use 50µ inch gold (bump) contact on plug side and 50µ inch flat gold (flat) contact on receptacle side.
ɀ
។ Contact Factory for tool.
*
ᔢ
Finish: 20µ inch gold in mating area/Gold flash on balance (terminating end).
Finish: 20µ inch gold in mating area/Tin lead on balance (terminating end).
Plug (Bump)
Receptacle (Flat)
FLAT
CONTACT
BUMP
CONTACT
RETENTION
LANCE
RETENTION
LANCE
Dimensions are shown in mm (inch)
Dimensions subject to change
52
ITT [ ITT Cannon ]
