Crane Aerospace & Electronics Power Solutions
MSA/MGA Single and Dual DC-DC Converters
28 Vꢀꢁꢂ ꢃꢄpꢅꢂ – 5 WAꢂꢂ
BOTTOM VIEW CASE C1
Projection Weld
Squared corner and dot on
top of case indicate pin one.
1.075 max. (27.31)
0.932 (23.67)
1
8
2
3
7
4
5
0.025
(0.64)
dia.
6
0.132 (3.35)
0.000
Weight: 15 grams maximum
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage the device.
Solder pins individually with heat application
not exceeding 300°C for 10 seconds per pin.
Materials
Header
Cover
Pins
Cold Rolled Steel/Nickel/Gold
Cold Rolled Steel/Nickel
#52 alloy, gold, compression glass seal
Gold plating of 50 - 150 microinches included in pin diameter
Seal hole: 0.070 ±0.003 (1.78 ±0.08)
Case C1 MSA, Rev B, 2013.04.15
Please refer to the numerical dimensions for accuracy.
Figure 26: msa Case Dimensions
www.craneae.com/interpoint
Pageꢀ12ꢀofꢀ15
MSA_MGAꢀRevꢀACꢀ-ꢀ2013.06.13
CRANE [ Crane Aerospace & Electronics. ]
