AV-51002
2015.12.16
2-6
Recommended Transceiver Power Supply Operating Conditions
Symbol
Description
Condition
—
Minimum(113)
Typical
—
Maximum (113)
3.6
Unit
V
VI
DC input voltage
Output voltage
–0.5
0
VO
—
—
VCCIO
85
V
Commercial
Industrial
Standard POR
Fast POR
0
—
°C
°C
—
—
TJ
Operating junction temperature
Power supply ramp time
–40
200 µs
200 µs
—
100
—
100 ms
4 ms
tRAMP
—
Recommended Transceiver Power Supply Operating Conditions
Table 2-6: Recommended Transceiver Power Supply Operating Conditions for Arria V GZ Devices
Symbol
Description
Minimum (117)
2.85
Typical
3.0
Maximum(117)
3.15
Unit
VCCA_GXBL
Transceiver channel PLL power supply (left side)
V
(118) (119)
,
2.375
2.85
2.5
2.625
3.15
3.0
VCCA_
GXBR
Transceiver channel PLL power supply (right side)
V
(118) (119)
,
2.375
0.82
2.5
2.625
0.88
VCCHIP_L
VCCHSSI_L
VCCHSSI_R
Transceiver hard IP power supply (left side)
Transceiver PCS power supply (left side)
Transceiver PCS power supply (right side)
0.85
0.85
0.85
V
V
V
0.82
0.88
0.82
0.88
(113)
(117)
(118)
(119)
The power supply value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance requirements.
Refer to the PDN tool for the additional budget for the dynamic tolerance requirements.
This value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance requirements. Refer to the
PDN tool for the additional budget for the dynamic tolerance requirements.
This supply must be connected to 3.0 V if the CMU PLL, receiver CDR, or both, are configured at a base data rate > 6.5 Gbps. Up to 6.5 Gbps, you
can connect this supply to either 3.0 V or 2.5 V.
When using ATX PLLs, the supply must be 3.0 V.
Arria V GZ Device Datasheet
Send Feedback
Altera Corporation