Datasheet—82567
2.5
2.5.1
PHY Pins
LED Pins
Signal Name
LED0
4
Pin
Type
O
Description
LED0
This signal is used for the programmable LED. It is programmed
through the Intel
®
ICH9/ICH10 NVM word 18h.
LED1
This signal is used for the programmable LED. It is programmed
through the Intel
®
ICH9/ICH10 NVM word 17h.
LED2
This signal is used for the programmable LED. It is programmed
through the Intel
®
ICH9/ICH10 NVM word 18h.
LED1
2
O
LED2
1
O
Note:
•
•
•
Reference the following Application Notes for details regarding the programming of the LEDs and the
various modes.
I/O Control Hub 9 NVM Map and Programming Information Application Notes
I/O Control Hub 9M NVM Map and Programming Information Application Notes
I/O Control Hub 10 NVM Map and Programming Information Application Notes
2.5.2
Analog Pins
Signal Name
MDI_PLUS[0]
MDI_MINUS[0]
27
26
Pins
Type
Description
Media Dependent Interface [0]
In MDI configuration, MDI_PLUS[0]+/- is used for the transmit pair
and in MDI-X configuration MDI_MINUS[0]+/- is used for the
receive pair.
Media Dependent Interface [1]
In MDI configuration, MDI_PLUS[1]+/- is used for the receive pair
and in MDI-X configuration MDI_MINUS[1]+/- is used for the
transmit pair.
Media Dependent Interface [2:3]
For 1000BASE-T MDI configuration, MDI_PLUS[2:3]+/- is used for
the receive pair and in MDI-X configuration MDI_MINUS[2:3]+/- is
used for the transmit pair.
A
MDI_PLUS[1]
MDI_MINUS[1]
MDI_PLUS[2]
MDI_MINUS[2]
MDI_PLUS[3]
MDI_MINUS[3]
23
22
21
20
17
16
A
A
2.5.3
Testability Pins
Signal Name
JTAG_TCK
JTAG_TDI
JTAG_TDO
40
7
6
Pin
Type
I
I/PU
T/s
JTAG Clock Input
JTAG TDI Input
JTAG TDO Output
Description
9