欢迎访问ic37.com |
会员登录 免费注册
发布采购

313072-002 参数 Datasheet PDF下载

313072-002图片预览
型号: 313072-002
PDF下载: 下载PDF文件 查看货源
内容描述: 高级内存缓冲器 [Advanced Memory Buffer]
分类和应用:
文件页数/大小: 250 页 / 3863 K
品牌: INTEL [ INTEL ]
 浏览型号313072-002的Datasheet PDF文件第91页浏览型号313072-002的Datasheet PDF文件第92页浏览型号313072-002的Datasheet PDF文件第93页浏览型号313072-002的Datasheet PDF文件第94页浏览型号313072-002的Datasheet PDF文件第96页浏览型号313072-002的Datasheet PDF文件第97页浏览型号313072-002的Datasheet PDF文件第98页浏览型号313072-002的Datasheet PDF文件第99页  
Reset  
9.4.2.1  
Implementation Detail  
1. The RESET# pad starts out low. This asynchronously asserts all internal resets.  
2. After power comes up and REFCLK stabilizes, the PLLs start generating clocks. At  
this time, the phase relations between the clocks are not guarantied to be correct.  
3. RESET# rises. A synchronized version releases the reset on the logic running on  
REFCLK. The chip monitors RESET# for 100 and 200 usec RESET# must remain  
stable during this time. If it falls the wait starts again until a stable high occurs.  
4. After a stable RESET# high is detected, the PLL is reset to bring the generated  
clocks into correct alignment with themselves.  
5. At this point the chip waits for the PLL to indicate reset complete. When it does, the  
internal resets are deasserted for all clock domains except TCK.  
9.4.3  
Reset Sequence for a Fast Reset  
Figure 9-1 below shows a fast reset sequence. Important steps are described below:  
• The chip is running with the RESET# high and a full link initialization sequence has  
been completed at least once.  
• A electrical idle is detected on the primary Southbound FBD Link.  
• If not the last DIMM, forward electrical idle Southbound to the next DIMM.  
• Drive logic “0’s” on Northbound transmitters.  
• The AMB completes the fast reset handshake (see below).  
• Reset is asserted for all non-sticky registers.  
• The values in the next fields are transferred to the Current fields.  
• The PLL remains in lock but the clock outputs are reset, causing them to realign.  
• IF not the last DIMM, the AMB waits for an electrical idle to appear on the  
secondary Northbound FBD link.  
• Forward electrical idle Northbound  
• The chip is released from reset.  
• Freezing sticky configuration registers through reset  
9.4.4  
Fast Reset Handshake  
When a reset event is detected on the primary Southbound FBD link, the AMB does the  
following:  
• Immediately stops accepting new DRAM commands from the link.  
• Halts all on-chip algorithms, including DRAM cal and MemBIST.  
• Waits 200 ns for any in-process DRAM commands to complete.  
• Asserts CKE high.  
• Waits 200 ns for DRAM self-refresh exit to complete.  
• Sends a DRAM precharge all to all ranks.  
• Waits 30 ns for precharge all to complete.  
• Sends DRAM self-refresh entry commands to all ranks  
.
Intel® 6400/6402 Advanced Memory Buffer Datasheet  
95