IA2910A
Data Sheet
Microprogram Controller
August 19, 2008
Description
The IA2910A is a form, fit and function compatible part to the AMD 2910A microprogram
controller. The IA2910A is an address controller which will sequence through a series of
microinstructions contained in a ROM or PROM. There are four sources of addresses from which
the IA2910A may select. The first is a direct data bus (DIN) input, which is straightforward. The
second is an internal address register. This register contains data loaded during a previous
microinstruction. The third source is a program counter register, which generally contains the
previous address incremented by one. The final source of addresses is a nine word deep stack
register which gives the capability to execute nested subroutine linkages. All internal registers are
clocked on the rising edge of the clock input (CLK). An OEn input enables the YOUT output bus
to be tri-stated. A block diagram is shown in Figure 1.
IA211030314-03
http://www.Innovasic.com
Customer Support:
Page 5 of 21
1-888-824-4184
INNOVASIC [ INNOVASIC, INC ]
