PEB 2091
PEF 2091
Pin Descriptions
Pin No.
P-LCC-44 T-QFP64
M-QFP64
Pin No.
Symbol Input (I)
Output (O)
Function
2.2.2.7 Power Controller Pins
21
38
PS1
I
Power status (primary): Different
function in LT and NT mode. LT: (1)
indicates that the remote power is
switched off. (1) on PS1 results in C/I
message "HI". Clamp to low if not
used.
NT: (1) indicates that primary power
supply is OK. The pin value is identical
to the overhead bit "PS1" value.
22
39
PS2
I
Power status (secondary): Different
function in LT and NT mode. LT: the
current feed value is transmitted (8 bit
serially) from a power controller. Read
the value with MON-8 "RPFC". NT: (1)
indicates that secondary power supply
is OK. The pin value is identical to the
overhead bit "PS2" value.
2.2.2.8 Clocks
10
22
XOUT
O
Crystal OUT: 15.36-MHz crystal is
connected. Suitable load capacitances
should be connected in parallel. Their
value depends on the crystal chosen
and board Layout. See "Oscillator
Circuit and Crystal", page 252 for
details.
Leave open if not used.
Semiconductor Group
45
Data Sheet 01.99
INFINEON [ Infineon ]
