®
PROFET ITS 5215L
Package and Ordering Code
Published by
Standard: PG-DSO-12-2
Infineon Technologies AG,
St.-Martin-Strasse 53,
Sales Code
ITS 5215L
D-81669 München
Ordering Code
SP000219826
© Infineon Technologies AG 2006
All Rights Reserved.
1)
1)
±0.1
6.4
±0.1
7.5
A
B
8˚
8˚
Attention please!
+0.075
-0.035
0.25
The information herein is given to describe certain
components and shall not be considered as a guarantee of
characteristics.
C
0.1
5 ×
1
0.1 C 12x
Seating Plane
±0.15
0.7
1
= 5
(0.2)
Terms of delivery and rights to technical change reserved.
0.4 +0.13
(4.4)
M
0.25
7
C A B
±0.3
10.3
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
±0.1
0.25 B
5.1
12
Infineon Technologies is an approved CECC manufacturer.
ø0.8 × 0.1-0.05 Depth4)
1
6
Information
±0.1
7.8
(Heatslug)
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon
1) Does not include plastic or metal protrusion of 0.15 max. per side
2) Stand OFF
3) Stand OUT
4) Pin 1 Index Marking; Polish finish
All package corners max. R 0.25
Technologies Representatives worldwide (see address list).
All dimensions in millimetres
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies
Office.
Printed circuit board (FR4, 1.5mm thick, one layer
70µm, 6cm2 active heatsink area) as a reference for
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-
support device or system, or to affect the safety or
max. power dissipation P , nominal load current
tot
I
and thermal resistance R
L(NOM)
thja
effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body,
or to support and/or maintain and sustain and/or protect
human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
PG-DSO-12
Infineon Technologies AG
13
2006-Mar-27
INFINEON [ Infineon ]
