欢迎访问ic37.com |
会员登录 免费注册
发布采购

ICE3BS03LJG 参数 Datasheet PDF下载

ICE3BS03LJG图片预览
型号: ICE3BS03LJG
PDF下载: 下载PDF文件 查看货源
内容描述: 离线式开关电源电流模式控制器,集成500V启动电池 [Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell]
分类和应用: 电池开关控制器
文件页数/大小: 25 页 / 492 K
品牌: INFINEON [ Infineon ]
 浏览型号ICE3BS03LJG的Datasheet PDF文件第1页浏览型号ICE3BS03LJG的Datasheet PDF文件第2页浏览型号ICE3BS03LJG的Datasheet PDF文件第3页浏览型号ICE3BS03LJG的Datasheet PDF文件第4页浏览型号ICE3BS03LJG的Datasheet PDF文件第6页浏览型号ICE3BS03LJG的Datasheet PDF文件第7页浏览型号ICE3BS03LJG的Datasheet PDF文件第8页浏览型号ICE3BS03LJG的Datasheet PDF文件第9页  
F3 PWM controller  
ICE3BS03LJG  
Pin Configuration and Functionality  
1 Pin Configuration and Functionality  
1.1  
Pin Configuration with PG-DSO-8  
1.2  
Pin Functionality  
BL (extended Blanking and Latch off enable)  
The BL pin combines the functions of extendable  
blanking time for entering the Auto Restart Protection  
Mode and the external latch off enable. The extendable  
blanking time function is to extend the built-in 20ms  
blanking time by adding an external capacitor at BL to  
ground. The external latch off enable function is an  
external access to latch off the IC. It is triggered by  
pulling down the BL pin to less than 0.25V.  
Pin  
Symbol Function  
1
BL  
extended Blanking and Latch off  
enable  
2
3
4
5
6
7
8
FB  
CS  
Feedback  
Current Sense  
Gate  
HV  
Gate driver output  
High Voltage input  
Not Connected  
FB (Feedback)  
The information about the regulation is provided by the  
FB Pin to the internal Protection Unit and to the internal  
PWM-Comparator to control the duty cycle. The FB-  
Signal is the only control in case of light load at the  
Active Burst Mode.  
n.c.  
VCC  
GND  
Controller Supply Voltage  
Controller Ground  
CS (Current Sense)  
The Current Sense pin senses the voltage developed  
on the series resistor inserted in the source of the  
Power MOSFET. If CS reaches the internal threshold  
of the Current Limit Comparator, the Driver output is  
immediately switched off. Furthermore, this current  
information can be used to realize the Current Mode  
operation through the PWM-Comparator where it  
compares with FB signal.  
Package PG-DSO-8  
BL  
1
8
7
6
5
GND  
VCC  
N.C.  
Gate  
FB  
2
The Gate pin is the output of the internal driver stage  
connected to the Gate of an external power MOSFET.  
CS  
3
4
HV (High Voltage)  
The high voltage Pin is connected to the rectified DC  
input voltage. It is the input for the integrated 500V  
Startup cell.  
Gate  
HV  
VCC (Power supply)  
The VCC pin is the positive supply of the IC. The  
operating range is between 10.5V and 26V.  
Figure 1  
Pin Configuration PG-DSO-8(top view)  
GND (Ground)  
The GND pin is the ground of the controller.  
Version 2.0  
5
6 Dec 2007