ICS1892
TSD
Chapter 4 Overview of the ICS1892
10Base-T/100BIaCseS-TX1I8nt9eg2rated PHYceiver™
Chapter 4 Overview of the ICS1892
The ICS1892 is a stream processor. During data transmission, it accepts sequential nibbles from its MAC
(Media Access Control)/Repeater Interface, converts them into a serial bit stream, encodes them, and
transmits them over the medium through an external isolation transformer. When receiving data, the
ICS1892 converts and decodes a serial bit stream (acquired from an isolation transformer that interfaces
with the medium) into sequential nibbles. It subsequently presents these nibbles to its MAC/Repeater
Interface.
The ICS1892 implements the OSI model’s physical layer, consisting of the following, as defined by the
ISO/IEC 8802-3 standard:
• Physical Coding sublayer (PCS)
• Physical Medium Attachment sublayer (PMA)
• Physical Medium Dependent sublayer (PMD)
• Auto-Negotiation sublayer
The ICS1892 is transparent to the next layer of the OSI model, the link layer. The link layer has two
sublayers: the Logical Link Control sublayer and the MAC sublayer. The ICS1892 can interface directly to
a MAC and offers multiple, configurable modes of operation. Alternately, this configurable interface can be
connected to a repeater, which extends the physical layer of the OSI model.
The ICS1892 transmits framed packets acquired from its MAC/Repeater Interface and receives
encapsulated packets from another PHY, which it translates and presents to its MAC/Repeater Interface.
Note: As per the ISO/IEC standard, the ICS1892 does not affect, nor is it affected by, the underlying
structure of the MAC/repeater frame it is conveying.
ICS1892, Rev. D, 2/26/01
February 26, 2001
© 2000-2001, Integrated Circuit Systems, Inc.
All rights reserved.
15
IDT™ / ICS™ 10Base-T/100Base-TX Integrated PHYceiver™
ICS1892
15
IDT [ INTEGRATED DEVICE TECHNOLOGY ]
