iC-LFH Series
HIGH-RESOLUTION LINEAR IMAGE SENSORS
Rev B1, Page 13/14
DESIGN REVIEW: Function Notes
iC-LFHxxx
1
No.
1
Function, parameter/code
Description and application notes
Sensitivity ratio with binning,
Gain increase in binning is lower than stated
Electrical Characteristics No. 309
2
Settling time,
Dips in the pixel voltage slow down settling time
Electrical Characteristics No. 314
Table 5: Notes on chip functions regarding iC-LFHxxx chip release 1
iC-LFHxxx
Z
No.
1
Function, parameter/code
Description and application notes
Binning/averaging
Binning/averaging cannot be used
2
Settling time,
Dips in the pixel voltage slow down settling time
Electrical Characteristics No. 314
Table 6: Notes on chip functions regarding iC-LFHxxx chip release Z
iC-LFHxxx
Z1
No.
1
Function, parameter/code
Description and application notes
Settling time,
Dips in the pixel voltage slow down settling time
Electrical Characteristics No. 314
Table 7: Notes on chip functions regarding iC-LFHxxx chip release Z1
REVISION HISTORY
Rel. Rel. Date∗ Chapter
Modification
Page
B1
2017-09-01 ELECTRICAL
CHARACTERISTICS
Operating conditions: Tj = -25...110 °C
6-7
ELECTRICAL
CHARACTERISTICS
Item No. 302 added
6
6
7
ELECTRICAL
CHARACTERISTICS
Item Nos. 309, 311 corrected
ELECTRICAL
OPTICAL CHARACTERISTICS: Diagrams updated
CHARACTERISTICS
OPERATING REQUIREMENTS
Operating conditions: Tj = -25...110 °C
8
9
DESCRIPTION OF FUNCTIONS
PINS RES1/0 table corrected
iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.com/infoletter and is automatically generated and shall be sent to registered users by email.
Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
The data specified is intended solely for the purpose of product description and shall represent the usual quality of the product. In case the specifications contain
obvious mistakes e.g. in writing or calculation, iC-Haus reserves the right to correct the specification and no liability arises insofar that the specification was from
a third party view obviously not reliable. There shall be no claims based on defects as to quality in cases of insignificant deviations from the specifications or in
case of only minor impairment of usability.
No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunder
with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In
particular, this also applies to the stated possible applications or areas of applications of the product.
iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be
expected to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications
include, without limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or
environments or in automotive applications unless specifically designated for such use by iC-Haus.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
Software and its documentation is provided by iC-Haus GmbH or contributors "AS IS" and is subject to the ZVEI General Conditions for the Supply of Products
and Services with iC-Haus amendments and the ZVEI Software clause with iC-Haus amendments (www.ichaus.com/EULA).
∗ Release Date format: YYYY-MM-DD
ICHAUS [ IC-HAUS GMBH ]
