Datasheet
DD2.X
PowerPC 750CL Microprocessor
Preliminary
1.3 Part Number Information
IBMPPC750CLGEQ8023
PowerPC 750 Family Member
Process Technology
Reliability Grade
Design Revision Level
Package Type
Application Conditions
Nominal Core Frequency and
Recommended Operating
VDD Range
Process Technology
Design Revision Level
Package Type
G = 10KE
E = DD2.0
Q = Lead-free flip chip plastic ball grid array (FCPBGA)
Part
Designator
Max. Core
Frequency
Recommended
VDD Range
Nominal VDD
Reference Only
A0
1 GHz
900 MHz
800 MHz
733 MHz
600 MHz
500 MHz
400 MHz
1.24 V to 1.30 V
1.15 V to 1.25 V
1.10 V to 1.20 V
1.10 V to 1.20 V
1.00 V to 1.10 V
0.95 V to 1.05 V
0.90 V to 1.00 V
1.27 V
1.20 V
1.15 V
1.15 V
1.05 V
1.00 V
0.95 V
90
Nominal Core Frequency
and Recommended
Operating VDD Range
80
73
60
50
40
See note 4.
Application Conditions
Reliability Grade
Notes:
Junction temperature (TJ) = 0°C to 105°C
3 = Grade 3; less than 100 failures in time (FIT) average failure rate (AFR). 60°C average
TJ, nominal VDD, 40 K power-on hours (POH). See note 3 and Section 1.4 Reliability Infor-
mation.
1. The TJ range, nominal core frequency, and VDD range specified by the part number become part of the recom-
mended operating conditions for the part number. Also see Table 3-2, Recommended Operating Conditions, on
page 22.
2. The lower voltage shown in the recommended VDD range is the minimum VDD at which the part will operate while
at the maximum TJ and maximum core frequency. If VDD decreases below the minimum value, some parts will not
operate correctly at maximum TJ and maximum core frequency.
3. Some early DD2.0 part numbers (IBMPPC750CLGEQ4024, IBMPPC750CLGEQ5024,
IBMPPC750CLGEQ6024, IBMPPC750CLGEQ7324, IBMPPC750CLGEQ8024, IBMPPC750CLGEQ9024,
IBMPPC750CLGEQA024) contained a “4” for the reliability grade. Subsequent reliability testing showed that
these parts qualified as reliability grade 3. The part numbers were then changed to show the actual reliability
grade. All of the IBMPPC750CLGEQxxx4 parts are grade 3 reliability.
4. VDD values are to be measured from KVDD to KGND.
1.4 Reliability Information
The 750CL parts described in this datasheet with a "3" in the reliability grade field of the part number (see
Section 1.3 Part Number Information) are known as grade 3 parts. Grade 3 parts for PowerPC 750 family
processors have the following features:
General Information
Page 12 of 70
Version 2.5
December 2, 2008