• CONNECTING AND MECHANICAL CHARACTERISTICS
Connecting Characteristics
Connector
Pitch
Connector
Footprint
M ating
Connector*
Connector Type
Sym bol
O verview
H ousing
Side Connector
CH
1 & 3
JST ZHR-4
-
Short Male Connector (1) (3)
(1.65 mm – 0.065 in long)
Samtec
CLT 104 Series
PVBS
PVBL
CFB
3
3
3
1
2
3
4
Long Male Connector (2) (3)
(4.27 mm – 0.198 in long)
Direct Soldering
(through hole)
1
2
3
4
Samtec
TMM 104-05-D
Female Connector (1) (3)
-
4
3
2
1
* For alternate connector type, please contact factory.
(1)
Connector should undergo vibration test before validation.
A second fixing point add double-sided adhesive tape (ref: 3M – 5925F).
For board-to-board mounting, we suggest wave soldering.
Pins are connected by twos.
(2)
(3)
Pin Out Assignment (with any connector)
N°
Function
1
2
3
4
Ground
Vcc – Voltage Supply
NTC – Temperature
Vout - Humidity
Wiring Characteristics
O verview
H ousing
M ore inform ation
Wiring cable length: TBD
1
Wiring cable type: AWG 30
With wires
Wiring cable length: TBD
Wiring cable type: AWG 30
3
Pin Out Assignment (with wires)
Colour
Function
Black
Red
Green
Ground
Vcc – Voltage Supply
NTC – Temperature
Yellow Vout - Humidity
________________________________________________________________________________________
Humirel HTG3500 Series Datasheet / HPC123 Rev B November 2007
7