ꢀ Product specifications
Nominal characteristic impedance
50ø
60 V AC (rms)
DC to 6 GHz
Operating temperature range
Operating humidity
-40˚C to +90˚C
90% max.
Ratings
Rated voltage
Rated frequency
Item
Conditions
Specification
Center: 20 mø max.
1. Contact resistance
Measured at 10 mA max.
Outside: 10 mø max.
2. Insulation resistance
3. Withstand voltage
4. V.S.W.R.*
Measured at 100 V DC
200 V AC for 1 minute
DC to 3 GHz
500 Mø min.
No line or insulation breakdown
1.3 max.
Dia.0.81Cable
1.35
1.4
Dia.1.13Cable
3 to 6 GHz
Dia.1.32Cable
1.5
5. Female contact holding force
6. Repetitive operation
0.15 N min.
Measured with a Ø 0.475 pin gauge
25 mø max. (Center)
15 mø max. (Outside)
30 cycles of insertion and disengagement
Contact resistance
No momentary disconnections of 1 µs min.
No damage, cracks, or parts looseness min.
Frequency of 10 to 100 Hz, single amplitude of 1.5 mm,
7. Vibration
8. Shock
acceleration of 59 m/s2, for 5 cyles in the direction of each of the 3 axes
No momentary disconnections of 1 µs min.
No damage, cracks, or parts looseness
Acceleration of 735 m/s2, 11 ms duration, sine half-wave
waveform, for 6 cycles in the direction of each of the 3 axes
No damage, cracks, or parts looseness
Insulation resistance 100 Mø min.(High temperature)
Insulation resistance 500 Mø min.(Pry)
9. Humidity resistance
9. (Steady state)
Temperature of 40˚C, humidity of 95%,
let stand for 96 hours
No damage, cracks, or parts looseness
Contact resistance 25 mø max. (Center)
15 mø max. (Outside)
Temperature: +40˚C
5 to 35˚C
Within 5 min.
+90˚C
30 min.
5 to 35˚C
Within 5 min.
/
/
/
/
/
/
10. Temperature cycle
Time:
30 min.
Cycles: 5
No excessive corrosion
48 hours continuous exposure to 5% salt water
11. Salt spray test
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement system of the diagram below.
NOTE 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
NOTE 2: Board type connectors were mounted to a 50Ω glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
ꢀMaterials
Part
Material
Phosphor bronze
Brass
Finish
Silver plating
Gold plating
Gold plating
Black
Remarks
—————
—————
—————
UL94V-0
Shell
Male center contact
Phosphor bronze
Female center contact
Plug
Receptacle
PBT
LCP
Insulator
Beige
UL94V-0
2
HRS [ HRS ]
