Signal Integrity Report – IT3 (25mm)
3.1.1.2 60% density pin assignment
Page 10
Figure 13 shows the corresponding SDD for pair 4 for 60% pin density configuration. The SDD
results are summarized in Table 3. Figure 14 - Figure 15 and Figure 16 - Figure 17 show the power
sum and ICR profile comparison with the IEEE 802.3ap spec for NEXT and FEXT, respectively.
Figure 12 60% density pin assignment
Figure 13 SDD for pair 4 (ports 7-8) of connector only for 60% pin density configuration
FREQUENCY
(GHZ)
INSERTION LOSS
(DB)
RETURN LOSS
(DB)
WORST PAIR-TO-PAIR
NEXT (DB)
WORST PAIR-TO-PAIR
FEXT (DB)
1.25
1.5625
2.5
-0.133
-0.155
-0.228
-0.293
-0.398
-0.511
-0.775
-42.58
-36.44
-25.40
-21.92
-26.94
-19.59
-21.45
-66.83
-67.67
-57.08
-50.70
-47.77
-48.56
-43.44
-60.03
-58.10
-51.37
-48.64
-49.86
-43.31
-39.60
3.125
5
6.25
10
Table 3 Summary of SDD for pair 4 (ports 7-8) of connector only for 60% pin density configuration