6
Device Selection Guide (Continued)
Typical
Viewing
Angle
Color and
Dominant
Wavelength
(nm), Typ.[3]
Luminous
Intensity Iv (mcd) [1,2]
@ 20 mA
Lamps Without Standoffs
on Leads
Lamps With Standoffs
on Leads
(Outline Drawing B)
2θ1/ 2
(Deg.)[4]
(Outline Drawing A)
Min.
1900
1900
1900
1900
520
Max.
3200
5500
5500
5500
1500
1900
2500
1500
1900
2500
3200
4200
880
HLMP-EL30-STK00*
HLMP-EL30-SV000
HLMP-EL30-SVK00*
Amber
HLMP-EL32-SV000
HLMP-EJ30-MQ000
HLMP-EJ30-NR000
HLMP-EJ30-PS000
HLMP-EH30-MQ000
HLMP-EH30-NR000
HLMP-EH30-PS000
HLMP-EH30-QT000
HLMP-EH30-RU000
HLMP-EG30-KN000
HLMP-EG30-MQ000
HLMP-EG30-NQ000
HLMP-EG30-NR000
HLMP-EG30-PQ000
HLMP-EG30-PR000
HLMP-EG30-PS000
HLMP-EG30-QT000
Orange 605
HLMP-EJ32-NR000
HLMP-EJ32-PS000
HLMP-EH32-MQ000
HLMP-EH32-NR000
HLMP-EH32-PS000
HLMP-EH32-QT000
HLMP-EH32-RU000
680
880
520
30°
680
Red-Orange 615
880
1150
1500
310
HLMP-EG32-MQ000
HLMP-EG32-NR000
520
1500
1500
1900
1500
1900
2500
3200
680
680
Red 626
880
880
HLMP-EG32-PS000
HLMP-EG32-QT000
880
1150
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
2. The optical axis is closely aligned with the package mechanical axis.
3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ1/ 2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.
5. The intensity of narrow viewing angle lamps is measured at the intensity peak.
Part numbers in bold are recommended for new designs.
*HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only.
**HLMP-xLxx-xx400 are selected to amber color bin 4 only.