N2758A CAN Trigger Module
•
Trigger on CAN 2.0A/B message
frames with user specified IDs
and/or data
•
•
•
•
•
•
Trigger on Error frames
Differential CAN
Acknowledge On/Off
Built In QuickHelp
Remote Control via GPIB/RS232
Compatible with 54621D, 54622D,
54641D, 54642D
The N2758A CAN trigger module
extends your Mixed Signal
Oscilloscope’s (MSO) capabilities
beyond the standard CAN SOF
trigger. The module enables the
MSO to isolate and trigger on a
particular frame’s content. This
triggering allows you to:
The N2758A kit includes the CAN trigger module, digital cable, ten grabbers, and
two probe ground leads.
• sort through frame traffic on
the bus
• isolate frames of interest
• specify particular frame
characteristics
• trigger and measure latency
between CAN frames meeting
the user specification
The CAN trigger module is ideal
for analyzing all traffic on the
broadcast network. Quickly find
frames that meet the specifica-
tions you select with an isolating
capability similar to pattern
triggering across multiple
channels in the parallel domain.
Synchronize to the particular
frame then examine the system
behavior of interest.
For more comprehensive
information, please see the
Agilent 54600-Series
Oscilloscopes Probes and
Accessories data sheet (Agilent
publication number 5968-8153).
You can get a copy by visiting
our website at:
The N2758A CAN trigger module reduces the time required to
debug your mixed signal CAN based designs.
www.agilent.com/find/mso
7
HP [ HEWLETT-PACKARD ]
