Performance Characteristics (continued)
Power Requirements
Line Voltage Range
54621A/D, 54622A/D, 54624A: 100 - 240 VAC ± 10ꢂ, CAT II, automatic selection
54641A/D, 54642A/D: 100-240 VAC, 50/60 Hz, CAT II, automatic selection; 100-132 VAC, 440 Hz, CAT II,
automatic selection
Line Frequency
Power Usage
54621A/D, 54622A/D, 54624A: 47 to 440 Hz
54641A/D, 54642A/D: 50/60 Hz, 100-240 VAC; 440 Hz, 100-132 VAC
54621A/D, 54622A/D, 54624A: 100 W max
54641A/D, 54642A/D: 110 W max
Environmental Characteristics
Ambient Temperature
Humidity
Operating -10 ꢀC to +55 ꢀC; Non-operating -51 ꢀC to +71 ꢀC
Operating 95ꢂ RH at 40 ꢀC for 24 hr; Non-operating 90ꢂ RH at 65 ꢀC for 24 hr
Operating to 4,570 m (15,000 ft); Non-operating to 15,244 m (50,000 ft)
Altitude
Vibration
HP/Agilent class B1 and MIL-PRF-28800F; Class 3 random
1
Shock
HP/Agilent class B1 and MIL-PRF-28800F; (operating 30 g, / sine, 11-ms duration, 3 shocks/axis along major axis.
2
Total of 18 shocks)
Pollution Degree2
Indoor Use Only
Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected.
This instrument is rated for indoor use only
Other
Installation Categories
CAT I:Mains isolated
CAT II:Line voltage in appliance and to wall outlet
Regulatory Information:
Safety
IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1994+A2:1995
UL 3111
CSA-C22.2 No. 1010.1:1992
Supplementary Information
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive
89/336/EEC, and carries the CE-marking accordingly. The product was tested in a typical configuration with
HP/Agilent test systems.
*
Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 10 ꢀC from firmware calibration temperature.
20
HP [ HEWLETT-PACKARD ]
