RF42/43
Register 0Eh. I/O Port Configuration
Bit
D7
Reserved
R
D6
extitst[2]
R
D5
extitst[1]
R
D4
extitst[0]
R
D3
itsdo
R/w
D2
D1
D0
dio0
R/w
dio2
dio1
Name
Type
R/w
R/w
Reset value = 00000000
Bit
Name
Function
7
Reserved
Reserved
External Interrupt Status.
6
5
4
3
extitst[2]
extitst[1]
extitst[0]
itsdo
If the GPIO2 is programmed to be external interrupt sources then the status
can be read here.
External Interrupt Status.
If the GPIO1 is programmed to be external interrupt sources then the status
can be read here.
External Interrupt Status.
If the GPIO0 is programmed to be external interrupt sources then the status
can be read here.
Interrupt Request Output on the SDO Pin.
nIRQ output is present on the SDO pin if this bit is set and the nSEL input is
inactive (high).
Direct I/O for GPIO2.
If the GPIO2 is configured to be a direct output then the value on the GPIO pin
can be set here. If the GPIO2 is configured to be a direct input then the value of
the pin can be read here.
2
1
0
dio2
dio1
dio0
Direct I/O for GPIO1.
If the GPIO1 is configured to be a direct output then the value on the GPIO pin
can be set here. If the GPIO1 is configured to be a direct input then the value of
the pin can be read here.
Direct I/O for GPIO0.
If the GPIO0 is configured to be a direct output then the value on the GPIO pin
can be set here. If the GPIO0 is configured to be a direct input then the value of
the pin can be read here.
69
Tel: +86-755-82973805
Fax: +86-755-82973550
E-mail: sales@hoperf.com
http://www.hoperf.com
HOPERF [ HOPERF ]
