MICRO SWITCH™ V7 Series
Premium Miniature Basic Switches
Honeywell’s MICRO SWITCH™ V7 miniature switches are designed for long term-reliability in a rugged switch
packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple
or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies.
The V7 switch is available as a pin plunger style or with optional integral or auxiliary levers to actuate the switch and
offer versatility in the application. The switch requires as little as 0,15 Newtons [approximately �½ ounce] to operate
for extremely sensitive applications or an operating force of almost 4 Newtons [14 ounces] where higher forces are
required. The V7 switch can reliably control logic level electrical loads from less than 0.1 A to power duty switching up
to 25 A. Agency certifications for the MICRO SWITCH™ V7 switches are provided through CSA, ENEC, and UL for
global use around the world.
What makes our switches better?
Certified with CSA, ENEC, and UL for global acceptability
Reliable snap-spring mechanism with more than 60 years of
proven service
Available with pin plungers, integral levers (fitted two posi-
tions), or auxiliary levers to meet equipment requirements
Electrical ratings from 0.1 A up to 25 A for
design flexibility in one package size
Big performance in a small package.
COST OPTIMIZATION • RELIABILITY
PERFORMANCE • GLOBAL ACCEPTANCE
2
sensing.honeywell.com
HONEYWELL [ HONEYWELL SOLID STATE ELECTRONICS CENTER ]
