HMC484MS8G / 484MS8GE
v04.0608
GaAs MMIC 10 WATT T/R SWITCH
DC - 3 GHz
Evaluation Circuit Board
11
List of Materials for Evaluation PCB 104124 [1]
The circuit board used in the final application should
be generated with proper RF circuit design tech-
niques. Signal lines at the RF port should have 50
ohm impedance and the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown above. The eval-
uation circuit board shown above is available from
Hittite Microwave Corporation upon request.
Item
Description
J1 - J3
J4 - J7
C1 - C3
C4
PCB Mount SMA RF Connector
DC Pin
100 pF capacitor, 0402 Pkg.
10 KpF capacitor, 0603 Pkg.
100 Ohm Resistor, 0402 Pkg.
R1 - R3
HMC484MS8G / HMC484MS8GE
T/R Switch
U1
[2]
PCB
104122 PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 139