v02.0204
HMC286
GaAs MMIC LOW NOISE
AMPLIFIER, 2.3 - 2.5 GHz
MICROWAVE CORPORATION
Evaluation PCB
8
List of Material for Evaluation PCB 103743*
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have 50
ohm impedance while the package ground leads should be
connected directly to the ground plane similar to that shown
above. A sufficient number of VIA holes should be used to
connect the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon request.
Item
Description
J1, J2
J3, J4
U1
PC Mount SMA Connector
DC Pin
HMC286 Amplifier
103741 Eval Board
PCB**
**Circuit Board Material: Roger 4350
*Reference this number when ordering complete evaluation PCB.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
8 - 27