HMC1019LP4E
v00.0911
0.5 dB LSB GaAs MMIC 5-BIT DIGITAL
ATTENUATOR, 0.1 - 30 GHz
Absolute Maximum Ratings
RF Input Power (0.1 to 30.0 GHz)
Control Voltage (CLK, SERIN, LE,
PUP, ASM1, ASM2, S/A)
Vdd, Vdd1
Vss
Channel Temperature
Continuous Pdiss (T = 85 C)
(derate 6.8 mW/
o
C above 85
o
C)
o
+27 dBm
Vdd + 0.5V
+7 Vdc
-7 Vdc
150 °C
0.445 W
146
°C/W
-65 to + 150
°C
-40 to +85
°C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Thermal Resistance
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
Outline Drawing
notes:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DiMensions Are in inCHes [MilliMeters]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
lAnD PAttern.
Package Information
Part Number
HMC1019lP4e
Package Body Material
RoHS-compliant Low Stress Injection Molded Plastic
Lead Finish
100% matte Sn
MSL Rating
Msl1
[1]
Package Marking
[2]
H1019
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AttenuAtors - DigitAl - sMt
6
HITTITE [ HITTITE MICROWAVE CORPORATION ]
