HMC1013LP4E
v00.0511
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
Evaluation PCB
11
SDLVAs - SMT
List of Materials for Evaluation PCB EVAL01-HMC1013LP4E
[1]
Item
J1
J2
J3 - J6
C2
C4
C5-C7
C8-C10
R1-R4
R5
R8
U1
PCB
[2]
Description
K-Type Connector
SMA Connector
DC Pins
47 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
10 nF Capacitor, 0402 Pkg.
4.7 µF Capacitor, Tantalum.
0 Ohm Resistor, 0402 Pkg.
120 Ohm Resistor, 0402 Pkg.
49.9 Ohm Resistor, 0201 Pkg.
HMC1013LP4E SDLVA
126093 Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines sho-
uld have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
N/C pins should also be connected to ground. The
evaluation circuit board shown is available from Hit-
tite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
11 - 8