HMC1013LP4E
v00.0511
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
Pin Descriptions
Pin Number
1-2, 7, 9-10, 12-13,
16, 18-19, 21, 23
Function
N/C
Description
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
These pins and the exposed package bottom must be
connected to a high quality RF/DC ground.
Interface Schematic
3, 5-6, 8, 11
GND
11
SDLVAs - SMT
11 - 6
4
RFIN
RF Input pin
14, 15
VIDEO_FB
VIDEO_OUT
Video out and feedback.
17
EN
Enable pin, connect to 3.3V supply for normal
operation. Total supply current reduced to less
than 11mA when EN is set to 0V.
20
VCC3
Bias Supply. Connect supply voltage to
these pins with appropriate filtering. See application circuit.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com