HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Evaluation PCB - Downconverter Mode
10
Mixers - HiGH iP3 - sMT
List of Materials for Evaluation PCB 122010
[1]
item
J1 - J3
J4
C1, C2, C3
C4, C6
C5, C7
C8
L1, L2
L3
r2, r3, r4
r5
U1
PCB
[2]
Description
PCB Mount sMA rF Connector
2mm DC Header
100 pF Chip Capacitor, 0402 Pkg.
1000 pF Chip Capacitor, 0603 Pkg.
2.2 µF Capacitor, Tantalum
0.01 µF Chip Capacitor, 0402 Pkg.
56 nH Chip inductor, 0402 Pkg.
36 nH Chip inductor, 0603 Pkg.
0 Ohm resistor, 0402 Pkg.
24 Ohm resistor, 1210 Pkg.
HMC665LP4(e) - Mixer
119242 evaluation Board
The circuit board used in the application should use
rF circuit design techniques. signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
[1] reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25Fr
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
10 - 8
HITTITE [ HITTITE MICROWAVE CORPORATION ]
