HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Typical Performance Cascade Analysis HMC665LP4E Downconverter Mode
(RF Input = 700 to 1200 MHz, IF Output = 250 to 450 MHz, LO = Low Side or High Side)
Component Level
Description
Gain
(dB)
-8.0
18.0
NF
(dB)
8.5
1.0
OiP3
(dBm)
15.0
37.5
OP1dB
(dBm)
7.0
21.0
+5V
Current (mA)
57.0
93.0
150.0
Gain
(dB)
-8.0
10.0
10.0
NF
(dB)
8.5
9.4
9.4
OiP3
(dBm)
15.0
31.7
31.7
iiP3
(dBm)
23.0
21.7
21.7
Cumulative MCM Performance
OP1dB
(dBm)
7.0
19.5
19.5
iP1dB
(dBm)
16.0
10.5
10.5
10
Mixers - HiGH iP3 - sMT
Mixer w/ LO Amplifier
iF Amplifier
HMC665LP4e
Cumulative MCM Performance
* rF image rejection filter is not included in the released eval boards.
Typical Performance Cascade Analysis HMC665LP4E Upconverter Mode
Component Level
Description
iF Amplifier
Mixer w/ LO Amplifier
HMC665LP4e
Gain
(dB)
18.0
-7.5
NF
(dB)
1.0
8.5
OiP3
(dBm)
38
21
OP1dB
(dBm)
21.0
7.0
+5V
Current (mA)
93.0
57.0
150.0
Gain
(dB)
18.0
10.0
10.0
(RF Output = 700 to 1200 MHz, IF Input = 250 to 450 MHz, LO = Low Side or High Side)
Cumulative MCM Performance
NF
(dB)
1.0
1.3
1.3
OiP3
(dBm)
38
20.5
20.5
iiP3
(dBm)
20
10
10
OP1dB
(dBm)
21.0
7.0
7.0
iP1dB
(dBm)
4.0
-3.0
-3.0
Cumulative MCM Performance
* iF image rejection filter is not included in the released eval boards.
Outline Drawing
eLeCTrOsTATiC seNsiTiVe DeViCe
OBserVe HANDLiNG PreCAUTiONs
NOTes:
1. LeADFrAMe MATeriAL: COPPer ALLOY
2. DiMeNsiONs Are iN iNCHes [MiLLiMeTers]
3. LeAD sPACiNG TOLerANCe is NON-CUMULATiVe.
4. PAD BUrr LeNGTH sHALL Be 0.15mm MAxiMUM.
PAD BUrr HeiGHT sHALL Be 0.05mm MAxiMUM.
5. PACKAGe WArP sHALL NOT exCeeD 0.05mm.
6. ALL GrOUND LeADs AND GrOUND PADDLe MUsT Be
sOLDereD TO PCB rF GrOUND.
7. reFer TO HiTTiTe APPLiCATiON NOTe FOr sUGGesTeD
LAND PATTerN.
10 - 5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com