HMC482ST89
/
482ST89E
v04.0710
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Evaluation PCB
8
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8 - 145
List of Materials for Evaluation PCB 109026
[1]
Item
J1 - J2
J3 - J4
C1, C2
C3
C4
C5
R1
L1
U1
PCB
[2]
Description
PCB Mount SMA Connector
DC Pin
Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
Resistor, 1210 Pkg.
Inductor, 0603 Pkg.
HMC482ST89 / HMC482ST89E
107368 Evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
