HMC408LP3
/
408LP3E
v03.0705
GaAs InGaP HBT MMIC 1 WATT
POWER AMPLIFIER, 5.1 - 5.9 GHz
Evaluation PCB
5
AMPLIFIERS - SMT
List of Materials for Evaluation PCB 105180
Item
J1 - J2
J3
C1 - C4
C5 - C7
C8
C9 - C10
C11
L1 - L2
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
2 mm DC Header
1,000 pF Capacitor, 0603 Pkg.
100 pF Capacitor, 0402 Pkg.
2.2 μF Tantalum Capacitor
0.5 pF Capacitor, 0603 Pkg.
10 pF Capacitor, 0402 Pkg.
1.6 nH Inductor, 0603 Pkg.
HMC408LP3 / HMC408LP3E
Amplifier
104629 Eval Board
[1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar to
that shown. A sufficient number of VIA holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 163