HMC375LP3
/
375LP3E
v03.0610
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 1.7 - 2.2 GHz
7
AMPLIFIERS - LOW NOISE - SMT
Pin Descriptions
Pin Number
1, 3, 4, 6-10,
12, 14, 16
2
Function
N/C
RFIN
Description
No connection necessary.
These pins may be connected to RF/DC ground.
This pin is matched to 50 Ohms with a 13 nH
inductor to ground. See Application Circuit.
Interface Schematic
5
ACG
AC Ground - An external capacitor of 0.01μF to
ground is required for low frequency bypassing.
See Application Circuit for further details.
11
RFOUT
This pin is AC coupled and matched to 50 Ohms.
13,15
Vdd2, Vdd1
Power supply voltage. Choke inductor and bypass
capacitor are required. See application circuit.
GND
Package bottom must be connected to RF/DC ground.
Application Circuit
Note: L1, L2, L3 and C1 should be located as close to pins as possible.
7 - 78
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com