HMC358MS8G
/
358MS8GE
v04.0607
MMIC VCO w/ BUFFER
AMPLIFIER, 5.8 - 6.8 GHz
Evaluation PCB
10
VCO
S
& PLOs - SMT
List of Materials for Evaluation PCB 104713
[1]
Item
J1 - J3
C1
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
10 μF Tantalum Capacitor
HMC358MS8G / HMC358MS8GE VCO
104368 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
10 - 6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com