HANBit
HMNR5128D(V)
Absolute Maximum Ratings
Symbol
Parameter
Value
Unit
°C
°C
°C
V
TA
AmbientOperatingTemperature
Storage Temperature(Vcc Off, Oscillator Off)
Lead Solder Temperature for 10 seconds
Input or Output Voltage
0 to 70
-40 to 70
260
TSTG
(1)
TSLD
VIO
-0.3 to Vcc+0.3
4.5 to 5.5
3.0 to 3.6
20
HMNR5128D
Supply Voltage
V
VCC
HMNR5128DV
V
IO
Output Current
mA
W
PD
Power Dissipation
1
Note : Permanent device damage may occur if Absolute Maximum Ratings are exceeded.
Functional operation should be restricted to the Recommended DC Operating Conditions detailed in this data sheet.
Exposure to higher than recommended voltage for extended periods of time could affect device reliability.
(1) Soldering temperature not to exceed 260°C for 10 seconds (Total thermal budget not to exceed 150°C for longer
than 30 seconds).
Caution : Negative undershoots below – 0.3V are not allowed on any pin while in the Battery Back-up mode.
Operating and AC Measurement Conditions
Parameter
VCC Supply Voltage
HMNR5128D
4.5 to 5.5
0 to 70
100
HMNR5128DV
3.0 to 3.6
0 to 70
50
Unit
V
Ambient Operating Temperature
Load Capacitance (CL )
°C
pS
nS
V
Input Rise and Fall Times
Input Pulse Voltages
≤ 5
≤ 5
0 to 3
0 to 3
Input and Output Timing Ref. Voltages
1.5
1.5
V
AC Measurement Load Circuit
Note : 50pF for HMNR5128DV
URL : www.hbe.co.kr
Rev. 2.0 (March, 2002)
3
HANBit Electronics Co.,Ltd