HANBit
HFDOM40KVxxx
Sec Cnt(2)
Feature(1)
X
X
Standby Immediate
This command causes the CompactFlash Storage Card to set BSY, enter the Sleep mode (which corresponds to
the ATA “Standby” Mode), clear BSY and return the interrupt immediately.
Recovery from sleep mode is accomplished by simply issuing another command (a reset is not required).
Translate Sector – 87h
Bit->
7
6
5
4
3
2
1
0
Command(7)
C/D/H(6)
87h
1
LBA
1
Drive
Head(LBA 27 – 24)
Cyl High(5)
Cyl Low(4)
Sec Num(3)
Sec Cnt(2)
Feature(1)
Cylinder High (LBA 23 – 16)
Cylinder Low (15 – 8)
Sector Number (LBA 7 – 0)
X
X
Translate Sector
This command allows the host a method of determining the exact number of times a user sector has been erased
and programmed. The controller responds with a 512 byte buffer of information containing the desired cylinder,
head and sector, including its Logical Address, and the Hot Count, if available, for that sector. Table 46 represents
the information in the buffer. Please note that this command is unique to the CompactFlash Storage Card.
Address Information
Information
ADDRESS
00h – 01h
02h
Cylinder MSB (00), Cylinder LSB (01)
Head
03h
Sector
04h – 06h
07h – 12h
13h
LBA MSB (04) – LSB (06)
Reserved
Erased Flag (ffh) = Erased; 00h = Not Erased
Reserved
14h – 17h
18h – 1Ah
1bh – 1ffh
Hot Count MSB (18) – LSB (1A)
Reserved
Note 1: A value of 0 indicates Hot Count is not supported.
Wear Level – F5h
Bit->
7
6
5
4
3
2
1
0
Command(7)
C/D/H(6)
F5h
X
X
X
Drive
Flag
URL:www.hbe.co.kr
25 / 25
HANBit Electronics Co., Ltd.
Rev. 1.1 (December, 2003)