BLOCK CHARACTERISTICS
C-Mount Interchangeable Dichroic Block A11214
G
This C-mount threaded optical block is for installing a dichroic mirror for
use at a 45° angle of incidence. You can use typical dichroic mirrors
that are commercially available for use with microscopes.
SPECIFICATIONS
Effective
Type No.
Compatible Dichroic Mirror Size
Weight
Beam Size
25 mm to 26 mm (W) × 35 mm to 38 mm (H)
Thickness: 0.9 mm to 1.1 mm (1 mm recommended)
Approx.
84 g
A11214
20 mm
* Supplied: Hex wrench
Dimensional Outlines (Unit: mm)
NOTE: • Dichroic mirrors for this block must be purchased sep-
arately.
• Commercially sold dichroic mirrors usually have mark-
ings to distinguish their front and back sides. Be care-
ful to install dichroic mirrors in the A11214 in the cor-
rect direction.
• When installing a dichroic mirror, be careful to keep it
clean and to avoid getting fingerprints on it.
C-MOUNT (FEMALE) DEPTH 5
20
20
C-MOUNT (FEMALE) DEPTH 5
C-MOUNT (FEMALE) DEPTH 5
Connection Example:
Fiber-Optic Dual / Triple Wavelength Detection
The dichroic mirror assembled in the block reflects light
at wavelengths shorter than a specific wavelength and
transmits longer wavelength light. Furthermore, only
light at a specific wavelength passes through the optical
filter and is then detected by the PMT module.
18
18
40
18
18
TPMOA0057EA
Dual Wavelength Detection
PMT MODULE
PMT MODULE
C-MOUNT INTERCHANGEABLE
FILTER BLOCK A11213
C-MOUNT
RING A9865
C-MOUNT
RING A9865
C-MOUNT
INTERCHANGEABLE
DICHROIC BLOCK A11214
FIBER ADAPTER
BLOCK A10037-xx
C-MOUNT ADAPTER BLOCK A10039
Triple Wavelength Detection
C-MOUNT INTERCHANGEABLE
FILTER BLOCK A11213
PMT MODULE
C-MOUNT
RING A9865
C-MOUNT
INTERCHANGEABLE
DICHROIC BLOCK
A11214
C-MOUNT ADAPTER BLOCK A10039
FIBER ADAPTER BLOCK A10037-xx
18
HAMAMATSU [ HAMAMATSU CORPORATION ]
