Global Mixed-mode Technology Inc.
G924
ing wire. Otherwise, the actual voltage at the IN pin
may exceed the absolute maximum rating.
Layout Guide
An input capacitance of 1µF is required between the
G924 input pin and ground (the amount of the capaci-
tance may be increased without limit), This capacitor
must be located a distance of not more than 1cm from
the input and return to a clean analog ground.
The output capacitor also must be located a distance
of not more than 1cm from output to a clean analog
ground. Because it can filter out the output spike
caused by the surge current due to the inductive effect
of the package pin and the printed circuit board’s rout-
ing wire.
Input capacitor can filter out the input voltage spike
caused by the surge current due to the inductive effect
of the package pin and the printed circuit board’s rout-
Recommend Minimum Footprint
SOT-23-5
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 0.2 Preliminary
Oct 01, 2004
8