GS1535 HD-LINX II™
Multi-Rate SDI
Automatic Reclocker
GS1535 Data Sheet
Key Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SMPTE 292M, 259M and 344M compliant
Supports data rates of 143, 177, 270, 360, 540,
1483.5, 1485 Mb/s
Supports DVB-ASI at 270Mb/s
Auto and Manual Modes for rate selection
Standards indication in Auto Mode
4:1 input multiplexor
Lock Detect Output
On-chip Input and Output Termination
Differential inputs and outputs
Configuarble automatic Mute or Bypass when not
locked
Manual Bypass function
SD/HD indication output to control GS1528 Dual
Slew-Rate Cable Driver
Pb-free and Green
Single 3.3V power supply
Operating temperature range: 0°C to 70°C
Description
The GS1535 Multi-Rate Serial Digital Reclocker is
designed to automatically recover the embedded clock
signal and re-time the data from a SMPTE 292M,
SMPTE 259M or SMPTE 344M compliant digital video
signal.
The device removes the high frequency jitter
components from the bit-serial stream. Input
termination is on-chip for seamless matching to 50Ω
transmission lines. An LVPECL compliant output
interfaces seamlessly to the GS1528 Cable Driver
The GS1535 can operate in either auto or manual rate
selection mode. In Auto mode the GS1535
automatically detects and locks onto an incoming
SMPTE SDI data signal from 143 Mb/s to 1.485 Gb/s.
For single rate data systems, the GS1535 can be
configured to operate in manual mode. In both modes,
the GS1535 requires only one external crystal to set the
VCO frequency when not locked and provides
adjustment free operation. In systems which require
passing non-SMPTE data rates, the GS1535 will
automatically or manually enter a bypass mode in order
to pass the signal without reclocking.
The ASI/177 input pin allows for manual selection of
support of either 177Mb/s or DVB-ASI inputs.
Applications
•
SMPTE 292M, SMPTE 259M and SMPTE 344M
Serial Digital Interfaces
XTAL+ XTAL-
XTAL XTAL
OUT+ OUT-
LF+ LF-
KBB
XTAL
OSC
BUFFER
RE-TIMER
M
U
X
DATA BUFFER
DDO/DDO
DDO_MUTE
DDI 0
PHASE
FREQUENCY
DETECTOR
D
A
T
A
M
U
X
M
U
X
CHARGE
PUMP
VCO
DDI 1
PHASE
DETECTOR
DIVIDE BY
2,4,6,8,12,16
DIVIDE BY
152, 160, 208
DDI 2
DDI 3
DDI_SEL[1:0]
CONTROL LOGIC
BYPASS
LOGIC
SS[2:0]
ASI/177
AUTO/MAN
LD
AUTOBYPASS
BYPASS
GS1535 Functional Block Diagram
18557 - 8
February 2005
1 of 22
www.gennum.com
GENNUM [ GENNUM CORPORATION ]
