GL860A USB 2.0 UVC Camera Controller
5.2 Operation Mode
For customized firmware, flash memory can use as external program memory of CPU. This is for customer to
develop their firmware. This is only available for 100-pin package type.
5.2.1 with Flash Memory
ꢀ
ꢀ
ꢀ
ꢀ
Only available in 100-pin QFP package
Force EXTCPU = 0
GPIO9 pull down
GPIO13/GPIO14 used as serial bus to configure sensor
5.2.2 without Flash Memory
ꢀ
ꢀ
ꢀ
If 100 pin, set EXTCPU = 0
GPIO9 pull down
GPIO13/GPIO14 are used as serial bus to configure sensor
©2007 GenesysLogic, Inc. - All rights reserved.
Page 35