GL830 USB2.0 to SATA Bridge Controller
CHAPTER 2 FEATURES
· Complies with Universal Serial Bus specification rev. 2.0.
· Complies with USB Storage Class specification ver.1.0. (Bulk only protocol)
· Operating system supported: Win Vista/ Win XP / 2000 / Me / 98 / 98SE; Mac OS 9.X / X.
· Integrated USB 2.0 Transceiver Macrocell Interface (UTMI) transceiver and Serial Interface Engine (SIE).
· Support 4 endpoints: Control (0) / Bulk Read (1) / Bulk Write (2) / Interrupt (3).
· 64 / 512 bytes Data Payload for full / high speed Bulk Endpoint.
· Complies with Serial ATA specification rev. 2.6.
· Support SATA hot-plug
· Support Spread Spectrum Clocking to reduce EMI
· Support Partial/Slumber power management
· Provide adjustable TX signal amplitude and pre-emphasis level
· Provide specified OOB signal detection and transmission
· Embedded Turbo 8051.
· ROM size: 12k words; RAM size: 1280 bytes. (Bulk Buffer: 512 words, MC RAM: 256 bytes)
· Supports Power Down mode and USB suspend indicator.
· Supports USB 2.0 TEST mode features.
· Supports 4 PIO and 4GPIO for programmable AP.
· Supports device power control for power on/off when running suspend mode.
· Provides LED indicator for Full Speed and High Speed .
· using 25 MHz external clock to provide better EMI.
· 3.3V power input; 5V tolerance pad.
· Supports Wakeup ability.
· Embedded Regulator (3.3V to 1.8V).
· Embedded Regulator (5V to 3.3V).
· Provides SPI interface for Finger Print (only for 64 pin package).
· Available in 48/64/128-pin LQFP.
©2007 Genesys Logic Inc. - All rights reserved.
Page 9
GENESYS [ GENESYS LOGIC ]
