Module Features
ACC-AAM25
2. System Trouble (yellow).
•
•
25 watt, 25 VRMS audio amplifier module.
3. Message Generator Trouble (yellow).
4. Tone Generator Trouble (yellow).
5. Microphone Trouble (yellow).
Field-programmable for system expansion to 50
watts (providing dual 25-watt speaker circuits)
or as a backup to the primary 25-watt amplifier
where required.
•
•
Provides single Class A or Class B speaker
circuit.
Utilizes plug-in-style terminal blocks for ease of
service and maintenance.
6. Record/Playback (green).
7. All-Call (green = Active).
8. Audio ON/OFF (green = Active, yellow = Manual Deactivation).
•
•
Fully supervised and power-limited.
Diagnostic LEDs include: yellow “trouble” LED
(cable fault, 70 VRMS fault, amp fault) and green
“amp functional” LED.
9. Status of each speaker zone (green = Active, yellow = Manual Deactiva-
tion or Fault).
ACC-EPM
Other System LEDs: Battery Trouble, Charger Trouble, Ground Fault,
•
•
•
Provides interface to non-fire paging equipment
for non-emergency paging applications.
Provides plug-in-style terminal blocks for ease
of service and maintenance.
Transformer-isolated, 600-ohm audio
connection to paging equipment.
Speaker Circuit Trouble, and Amplifier Supervisory.
Ordering Information
GWACCZ
25 watt, 25 VRMS, emergency Voice Evacuation Control
Panel (VECP) with integral commercial microphone, digital
message generator, zone-splitter module (ACC-ZSM), zone
page module with keypad (ACC-ZPMK).
FC-XRM70
•
Converts 25 VRMS audio outputs to 70.7 VRMS
for retrofit applications.
Plugs directly on ACC-AAM25 module(s),
•
allowing independent conversion to 70.7VRMS.
ACC-AAM25
Optional 25 watt, 25 VRMS Audio Amplifier Module with single
Class A or Class B speaker circuit.
FC-LPS
•
Provides local digital message playback for user
review of field-recorded custom messages.
ACC-EPM
FC-XRM70
Optional External Page Module.
Specifications
Electrical specifications
Command input circuits(CMD1andCMD2):
Trigger input voltage 10.5 — 29 VDC. NOTE:
When programmed for reverse-polarity
activation.
Trouble contact rating: 2.0 A at 30 VDC
(resistive), 0.6 A @ 125 VAC (resistive).
Auxiliary power output: Specific application
power 24 V, 35 mA.
Optional 70.7 VRMS Converter Module (one required per
amplifier, consult factory for availability).
FC-RM
Optional Remote Microphone, includes backbox (only one
FC-RM per system).
FC-LPS
Optional Local Playback Speaker.
BAT-1270
BAT-12120
BAT-12180
Battery, 12 volt, 7.0 AH (two required).
Battery, 12 volt, 12.0 AH (two required).
Battery, 12 volt, 18.0 AH (two required).
Primary (AC) power: 1.6 A maximum
@ 120 VAC, 50/60 Hz.
Secondary power (battery) charging circuit:
• Supports lead-acid batteries only.
• Float-charge voltage: 27.6 V.
• Maximum charge current: 800 mA.
• Maximum battery charging capacity:18 AH.
Cabinet dimensions
Door: 26.174" (66.482 cm) high x 15.780" (40.081
cm) wide x 1.125" (2.858 cm) deep. Backbox:
26.0" (66.040 cm) high x 15.5" (39.370 cm) wide x
4.75" (12.065 cm) deep, depth includes door.
Standards and Codes
The GWACC complies with the following
standards: NFPA 72 National Fire Alarm Code;
NFPA 101 Life Safety Code; UL 864 Standard
for Control Units for Fire Alarm Systems; and
UL 1711 Standard for Amplifiers for Fire Alarm
Systems.
Listings
Listings and approvals below apply to the basic
GWACCZ voice evacuation control panel. In
some cases, certain modules may not be listed
by certain approval agencies, or listing may be
in process. Consult factory for latest listing
status.
•
UL Listed: file S521.
Page 2 of 4
GWACCZ CS-2505 09/01/06
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
