February 2004 Version 1.0
FME/MS/DAC80/FL_2/5084
DK86064-1 Dual 14-bit 1GSa/s DAC Development Kit
Worldwide Headquarters
Japan
Tel: +81 44 754 3753
Fax: +81 44 754 3329
Asia
Fujitsu Limited
Kamikodanaka 4-1-1
Nakahara-ku
Kawasaki-shi
Kanagawa-ken 211-8588
Japan
Tel: +65 281 0770
Fax: +65 281 0220
Fujitsu Microelectronics Asia Pte Ltd
151 Lorong Chauan
New Tech Park
#05-08
Singapore 556741
http://www.fujitsu.com
http://www.fmal.fujitsu.com
USA
Tel: +1 408 737 5600
Fax: +1 408 737 5999
Europe
Fujitsu Microelectronics America, Inc.
1250 E. Arques Avenue, M/S 333
Sunnyvale, CA 94088-3470
USA
T
el: +49 6103 6900
Fujitsu Microelectronics Europe GmbH
Fax: +49 6103 690122
Am Siebenstein 6-10
D-63303 Dreieich-Buchschlag
Germany
Tel: +1 800 866 8608
Customer Response Center
Fax: +1 408 737 5984
Mon-Fri: 7am-5pm (PST)
http://www.fma.fujitsu.com/
http://www.fme.fujitsu.com/
4
The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not
intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent
rights or other rights of third parties arising from the use of this information or circuit diagrams. No license is granted by implication
or otherwise under any patent or patent rights of Fujitsu Microelectronics Europe GmbH.
FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office
equipment, industrial, communications, and measurement equipment, personal or household devices, etc.).
CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as
aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.)
are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages
arising from such use without prior approval.
Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such
failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention
of over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign
Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export
of those products from Japan.
FME/MS/DAC80/FL_2/5084 1.0
Page 4 of 4
Production
Copyright © 2004 Fujitsu Microelectronics Europe GmbH
Disclaimer:
The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before
ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.
FUJITSU [ FUJITSU COMPONENT LIMITED. ]
