Document No.: FT_000138
VINCULUM-II EMBEDDED DUAL USB HOST CONTROLLER IC Datasheet
Version -
1.2
Clearance No.: FTDI#
143
9
Device Characteristics and Ratings
9.1 Absolute Maximum Ratings
The absolute maximum ratings for VNC2 are shown in
These are in accordance with the
Absolute Maximum Rating System (IEC 60134). Exceeding these may cause permanent damage to the
device.
Parameter
Storage Temperature
Value
-65°C to 150°C
168 Hours
(IPC/JEDEC J-STD-033A MSL Level 3
Compliant)*
-40°C to 85°C
0 to +3.63
0 to +3.63
0 to + 1.98
-0.5 to +(Vcc +0.5)
Unit
Degrees C
Floor Life (Out of Bag) At Factory Ambient
( 30°C / 60% Relative Humidity)
Hours
Ambient Temperature (Power Applied)
Vcc Supply Voltage
VCC_IO
VCC_PLL_IN
DC Input Voltage - USBDP and USBDM
DC Input Voltage - High Impedance
Bidirectional
DC Input Voltage - All other Inputs
DC Output Current - Outputs
DC Output Current - Low Impedance
Bidirectional
Table 32 Absolute Maximum Ratings
Degrees C.
V
V
V
V
-0.5 to +5.00
V
-0.5 to +(Vcc +0.5)
Default 4 **
V
mA
Default 4 **
mA
*
If devices are stored out of the packaging beyond this time limit the devices should be baked
before use. The devices should be ramped up to a temperature of 125°C and baked for up to 17
hours.
**
The drive strength of the output stage may be configured for either 4mA, 8mA, 12mA or 16mA
depending on the register setting controlled within the firmware. The default is 4mA.
Copyright © 2010 Future Technology Devices International Limited
72