Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
3.1.2 Interfaces.
Component
Board designator
Description
(1)
USB1, USB2
CN1, CN2
CN13
J1 -J4
CN9
VNC2 USB host ports 1&2.
USB Type B
FT4232H USB Slave connection.
Daughterboard connectors for VNC2 Daughterboard.
VNC2 SPI interface pins.
VNC2 Socket
(2)
SPI
(2)
UART
CN10
CN11
CN3
VNC2 UART interface pins.
(2)
FIFO
VNC2 FIFO interface pins.
(2)
IOBUS[7..0]
VNC2 IOBUS [7:0] port pins.
VNC2 IOBUS [8:15] port pins.
VNC2 IOBUS [16:23] port pins.
VNC2 IOBUS [24:31] port pins.
VNC2 IOBUS [32:39] port pins.
VNC2 IOBUS [40:43] port pins.
(2)
IOBUS[8..15]
CN4
(2)
(2)
(2)
(2)
IOBUS[16..23]
IOBUS[24..31]
IOBUS[32..39]
IOBUS[40..43]
CN5
CN6
CN7
CN8
All of VNC2 IO ports and PROG#, RESET# pins are
brought on to this area.
(2)
Prototyping area
P1
Notes
(1) Gender changer required when ports are configured as slave ports by VNC2 firmware,
to enable connection to a USB host port.
(2) Those pins are shared between different areas and connectors on the board. You can
use only one device at time connected to those pins.
Table 3.2
V2-Eval Board Interfaces
Copyright © 2010 Future Technology Devices International Limited
10
FTDI [ FUTURE TECHNOLOGY DEVICES INTERNATIONAL LTD. ]
