FT230X 参数 Datasheet PDF下载

FT230X USB TO BASIC UART IC

Document No.: FT_000566 Clearance No.: FTDI# 260

Version 1.2

2

6

RTS#

CTS#

Output

Input

Request to Send Control Output / Handshake Signal.

Clear To Send Control Input / Handshake Signal.

Configurable CBUS I/O Pin. Function of this pin is configured in the

device MTP memory. The default configuration is TXDEN. See CBUS

Signal Options, Table 3.7.

Configurable CBUS I/O Pin. Function of this pin is configured in the

device MTP memory. The default configuration is RXLED#. See CBUS

Signal Options, Table 3.7.

Configurable CBUS I/O Pin. Function of this pin is configured in the

device MTP memory. The default configuration is TXLED#. See CBUS

Signal Options, Table 3.7.

Configurable CBUS I/O Pin. Function of this pin is configured in the

device MTP memory. The default configuration is SLEEP#. See CBUS

Signal Options, Table 3.7.

15

CBUS0

I/O

14

CBUS1

I/O

7

CBUS2

I/O

16

CBUS3

I/O

Table 3.6 UART Interface and CBUS Group (see note 1)

Notes:

1. When used in Input Mode, the input pins are pulled to VCCIO via internal 75kΩ (approx) resistors.

These pins can be programmed to gently pull low during USB suspend (PWREN# = “1”) by setting an

option in the MTP memory.

Copyright © 2013 Future Technology Devices International Limited

10