General
7.3.5 Power consumption operating behaviors
Table 9. Current Consumption
Mode
Maximum Conditions
Frequency
Typical at 3.3 V, Maximum at 3.6
25°C
V, 105°C
1
1
IDD
TBD
IDDA
IDD
IDDA
RUN
80 MHz
• 80 MHz Device Clock
TBD
TBD
TBD
• Regulators are in full regulation
• Relaxation Oscillator on
• PLL powered on
• Continuous MAC instructions with fetches from
Program Flash
• All peripheral modules enabled.
• TMRs and SCIs using 1X Clock
• NanoEdge within PWMA using 2X clock
• ADC/DAC powered on and clocked at 5 MHz2
• Comparator powered on
WAIT
80 MHz
• 80 MHz Device Clock
TBD
TBD
TBD
TBD
• Regulators are in full regulation
• Relaxation Oscillator on
• PLL powered on
• Processor Core in WAIT state
• All Peripheral modules enabled.
• TMRs and SCIs using 1X Clock
• NanoEdge within PWMA using 2X clock
• ADC/DAC/Comparator powered off
STOP
4 MHz
2 MHz
• 4 MHz Device Clock
• Regulators are in full regulation
• Relaxation Oscillator on
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
• PLL powered off
• Processor Core in STOP state
• All peripheral module and core clocks are off
• ADC/DAC/Comparator powered off
LPRUN
(LsRUN)
• 200 kHz Device Clock from Relaxation Oscillator
(ROSC)
• ROSC in standby mode
• Regulators are in standby
• PLL disabled
• Repeat NOP instructions
• All peripheral modules enabled, except NanoEdge
and cyclic ADCs3
• Simple loop with running from platform instruction
buffer
LPWAIT
(LsWAIT)
2 MHz
• 200 kHz Device Clock from Relaxation Oscillator
(ROSC)
TBD
TBD
TBD
TBD
• ROSC in standby mode
• Regulators are in standby
• PLL disabled
• All peripheral modules enabled, except NanoEdge
and cyclic ADCs3
• Processor core in wait mode
Table continues on the next page...
MC56F8455x Advance Information Data Sheet, Rev. 2, 06/2012.
Freescale Semiconductor, Inc.
29
Preliminary
General Business Information