ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
ELECTRICAL RATINGS
Supply Voltage at VS1 and VS2
Normal Operation (DC)
V
V
-0.3 to 27
-0.3 to 40
SUP(SS)
VSUP(PK)
Transient Conditions (load dump)
Supply Voltage at VDD
VDD
-0.3 to 5.5
V
V
Input / Output Pins Voltage(6)
V
-0.3 to VDD +0.3
CS, RST, SCLK, PWMIN, ADOUT0, ADOUT1, MOSI, MISO, TXD, RXD,
HVDD
IN
Interrupt Pin (IRQ)(7)
V
-0.3 to 11
-0.3 to VSUP +0.3
-0.3 to 45
IN(IRQ)
HS1 and HS2 Pin Voltage (DC)
LS1 and LS2 Pin Voltage (DC)
V
V
V
V
HS
V
LS
L1, L2, L3 and L4 Pin Voltage
V
-18 to 40
±100
Normal Operation with a series 33k resistor (DC)
LxDC
V
Transient input voltage with external component (according to ISO7637-2)
(See Figure 5, page 17)
LxTR
ISENSEH and ISENSEL Pin Voltage (DC)
VSENSE Pin Voltage (DC)
VISENSE
VVSENSE
-0.3 to 40
-27 to 40
V
V
V
LIN Pin Voltage
VBUSDC
VBUSTR
-18 to 40
Normal Operation (DC)
-150 to 100
Transient input voltage with external component (according to ISO7637-2)
(See Figure 4, page 17)
VDD output current
I
Internally Limited
A
V
VDD
ESD Voltage(8)
V
V
±8000
±2000
±200
Human Body Model - LIN Pin
Human Body Model - all other Pins
Machine Model
ESD1-1
ESD1-2
V
ESD2
Charge Device Model
Corner Pins (Pins 1, 8, 9, 16, 17, 24, 25 and 32)
All other Pins (Pins 2-7, 10-15, 18-23, 26-31)
V
V
±750
±500
ESD3-1
ESD3-2
Notes
6. Exceeding voltage limits on specified pins may cause a malfunction or permanent damage to the device.
7. Extended voltage range for programming purpose only.
8. Testing is performed in accordance with the Human Body Model (C
= 100pF, R
= 1500Ω), Machine Model (C
= 200pF, R
ZAP
ZAP
ZAP
ZAP
= 0Ω) and the Charge Device Model, Robotic (C
= 4.0pF).
ZAP
33912
Analog Integrated Circuit Device Data
Freescale Semiconductor
5
FREESCALE [ Freescale ]
