1. Mounting Precautions
1.1 Lead Type Crystal Units
1.1.1. Structure
Tubular crystal units are hermetically sealed using glass (see Figures 1 and 2).
Case
Case
Hermetic
Glass
Hermetic
Glass
Lead
Lead
Figure
1
Figure 2
1.1.2 Unbending the lead
(1) DO NOT pull the lead excessively if unbending a lead or removing a crystal unit. The excessive force may
crack the glass and reduce the degree of vacuum. This may eventually result in deterioration of the
characteristics and may also break the crystal chip see Figure 3).
(2) Unbend the lead by pressing on the bent part from both the upper and lower sides with fixing the bottom of
lead tightly. (see Figure 4).
Tweezers or
needle-nose pliers
Breakage
Pull out
Case
Lead
Figure 3
Figure 4
Page 1 of 2
7/7/2011